Wave Mechanics Examples: Power Carried by a 1D Wave
This companion article provides exercises for WM19, wave mechanics: power Carried by a 1D
Wave. All exercises are stated first so they can be attempted without seeing the answers. Complete
worked solutions follow in Part II.
The central WM19 result is the instantaneous signed power crossing a fixed position on an ideal
stretched string,
Positive power denotes net mechanical-energy transport toward increasing x, while negative power
denotes net transport toward decreasing x.
For a pure right-moving wave,
and for a pure left-moving wave,
For a right-moving sinusoidal wave,
the instantaneous and average powers are
and
For a general two-direction solution,
WM19 found
These are the standard ideal-string power relations developed in WM19 and in standard
wave-mechanics treatments [1, 2, 3, 5].
Figure. The sign of P = −Tuxut depends on the product of local slope and local
transverse velocity. The sign of power records the direction of net energy flow.
How to use this problem set
Attempt all exercises in Part I before consulting Part II. Throughout the set, keep three
distinctions explicit:
- power is an energy-transfer rate, not an energy density;
- the sign of power indicates direction, not whether the string has “positive” or
“negative” energy;
- a Standing Wave can have nonzero instantaneous local power even though its
time-averaged power is zero.
Part I: Exercises
Exercise 1: Instantaneous power from local measurements
A string has Tension
At one event,
Find:
- the instantaneous power;
- the direction of energy flow;
- the new power if ut changes sign while ux does not.
Exercise 2: Sign diagnostics
Without doing any arithmetic beyond signs, determine the sign of P and the corresponding
direction of energy flow for each case:
- ux > 0, ut > 0;
- ux > 0, ut < 0;
- ux < 0, ut > 0;
- ux < 0, ut < 0;
- either ux = 0 or ut = 0.
Use the sign diagram above to check your reasoning.
Exercise 3: Dimensional consistency
Show that
has units of watts. Explicitly identify the units of T, ux, and ut.
Exercise 4: Pure traveling wave and the relation P = ±cℰ
At one event, a pure traveling wave has energy density
and wave speed
Find the signed power if the wave is:
- purely right-moving;
- purely left-moving.
Explain why the magnitudes are equal.
Exercise 5: Instantaneous sinusoidal power
A right-moving sinusoidal wave is
- Derive the instantaneous power formula from P = −Tuxut.
- At what phase values in one cycle is the instantaneous power zero?
- At what phase values is the instantaneous power maximum?
- Explain why maximum power occurs when the displacement itself passes through zero.
Figure. For a right-moving sinusoidal wave, displacement varies as cos 𝜃 while normalized
instantaneous power varies as sin 2𝜃.
Exercise 6: Average power of a sinusoidal wave
A string has
A right-moving sinusoidal wave on the string has amplitude
and frequency
Find:
- the wave speed;
- the angular frequency;
- the average power.
Exercise 7: Required amplitude for a target power
The same string as in Exercise 6 must carry an average power of
at frequency
What sinusoidal amplitude is required?
Exercise 8: Square-law scaling
For a fixed string, a sinusoidal traveling wave initially has average power P0.
Find the new average power in terms of P0 if:
- amplitude is doubled while frequency is unchanged;
- frequency is tripled while amplitude is unchanged;
- amplitude is halved and frequency is doubled;
- both amplitude and frequency are doubled.
Exercise 9: Energy balance on a finite interval
The power entering a fixed interval [a,b] at one instant is
while the power leaving at the right boundary is
- Find the instantaneous rate of change of the total wave energy stored in [a,b].
- Is the stored energy increasing or decreasing?
- How would the answer change if the two powers were interchanged?
Figure. For a fixed interval, the rate of change of stored energy equals incoming power
minus outgoing power.
Exercise 10: Competing right- and left-moving waves
At one event in a two-direction field,
and the local profile derivatives are
Use
to find:
- the right-moving power contribution;
- the signed left-moving contribution;
- the net power;
- the net direction of energy flow.
Figure. Right-moving and left-moving energy contributions enter the signed power with
opposite signs.
Exercise 11: Equal counter-propagating components
Suppose at one event the two directional derivatives satisfy
- What is the net instantaneous power according to the two-direction formula?
- Does zero net power imply zero local energy density?
- Explain how this relates to a perfect standing wave built from equal
counter-propagating components.
Exercise 12: Instantaneous power in a standing wave
A standing wave is
- Derive
- Show that the time average at any fixed x is zero.
- Name two different reasons the instantaneous power can vanish at a particular
event.
- Explain why “zero average transport” does not mean “no local energy motion.”
Exercise 13: Power carried by a localized pulse
At one point in a purely right-moving pulse, the local energy density is
and the propagation speed is
- Find the instantaneous power crossing that point.
- If the same local energy density belonged to a purely left-moving pulse, what would
the signed power be?
- Why can this problem be solved without knowing the detailed pulse shape?
Exercise 14: Synthesis from string properties to transported power
A stretched string has
It carries a right-moving sinusoidal wave with
Find:
- the wave speed c;
- the angular frequency ω;
- the wavelength λ;
- the Wavenumber k;
- the average energy density ⟨ℰ⟩;
- the average power using ⟨P⟩ = c⟨ℰ⟩;
- the average power again using ⟨P⟩ =
TA2kω, and verify agreement.
Part II: Complete Worked Solutions
Solution 1: Instantaneous power from local measurements
Use
With
we obtain
| P | = −(80)(−0.030)(0.50) | (34)
|
| = 1.20 W . | (35) |
Because P > 0, energy flows toward increasing x.
If ut changes sign while the slope does not, then
and
| P | = −(80)(−0.030)(−0.50) | (37)
|
| = −1.20 W . | (38) |
The magnitude is unchanged, but the energy-flow direction reverses.
Solution 2: Sign diagnostics
Since T > 0, the sign of P is the opposite of the sign of uxut.
- ux > 0 and ut > 0 give uxut > 0, so
meaning energy flows toward −x.
- ux > 0 and ut < 0 give uxut < 0, so
meaning energy flows toward +x.
- ux < 0 and ut > 0 also give uxut < 0, so
- ux < 0 and ut < 0 give uxut > 0, so
- If either factor vanishes, then
Solution 3: Dimensional consistency
The units are
The slope ux is dimensionless because it is displacement per horizontal distance, meter per
meter.
Therefore
| [P] | = [T][ux][ut] | (45)
|
| = N  | (46)
|
| =  | (47)
|
| =  | (48)
|
| = W . | (49) |
Solution 4: Pure traveling wave and the relation P = ±cℰ
For a pure right-moving wave,
Hence
| P→ | = (35)(0.24) | (51)
|
| = 8.4 W . | (52) |
For a pure left-moving wave,
so
The magnitudes are equal because the energy density and propagation-speed magnitude are the
same; only the direction of transport differs.
Solution 5: Instantaneous sinusoidal power
Let
Then
and
Therefore
| P | = −Tuxut | (59)
|
| = −T(−Ak sin 𝜃)(Aω sin 𝜃) | (60)
|
| = TA2kω sin 2𝜃 . | (61) |
The power is zero when
so in one cycle
It is maximum when
which occurs at
At these phases the displacement is zero because cos 𝜃 = 0, but both the local slope magnitude and
transverse-speed magnitude are maximal. Since power depends on their product rather than on
displacement itself, the power is largest there.
Solution 6: Average power of a sinusoidal wave
First find the wave speed:
| c | =  | (66)
|
| =  | (67)
|
| =  | (68)
|
| ≈ 94.9 m/s . | (69) |
The angular frequency is
| ω | = 2πf | (70)
|
| = 2π(25) | (71)
|
| = 50π rad/s | (72)
|
| ≈ 157.1 rad/s. | (73) |
Convert the amplitude:
Now use
Thus
| ⟨P⟩ | = (0.010)(0.0040)2(157.1)2(94.9) | (76)
|
| ≈ 0.187 W . | (77) |
Solution 7: Required amplitude for a target power
Solve
for A:
Using
we obtain
| A | ≈ | (81)
|
| ≈ 0.0131 m. | (82) |
Therefore
Solution 8: Square-law scaling
For a fixed string,
Therefore:
- Doubling A multiplies power by 22 = 4:
- Tripling f multiplies power by 32 = 9:
- Halving A gives a factor 1∕4, while doubling f gives a factor 4. The factors cancel:
- Doubling both gives
so
Solution 9: Energy balance on a finite interval
Use
Therefore
 | = 3.2 − 1.1 | (91)
|
| = 2.1 W . | (92) |
The stored energy is increasing because more power enters than leaves.
If the powers are interchanged,
so the same magnitude of energy is being lost from the interval.
Solution 10: Competing right- and left-moving waves
The right-moving contribution is
| P→ | = Tc(F′)2 | (94)
|
| = (50)(20)(0.040)2 | (95)
|
| = 1.60 W . | (96) |
The signed left-moving contribution is
| P← | = −Tc(G′)2 | (97)
|
| = −(50)(20)(0.030)2 | (98)
|
| = −0.90 W . | (99) |
Hence the net power is
| P | = 1.60 − 0.90 | (100)
|
| = 0.70 W . | (101) |
Because the net power is positive, the net energy transport is toward increasing x.
Solution 11: Equal counter-propagating components
If
then
Therefore
This does not imply that the local energy density is zero. Each component can carry nonzero
energy, but their signed directional power contributions cancel.
A perfect standing wave is produced by equal-amplitude counter-propagating components, but the
two local derivative magnitudes need not be equal at every event because the two components are
sampled at different phases. Thus a standing wave can have nonzero instantaneous local
power. The equality considered here is a special event at which the opposing directional
contributions cancel exactly; over a full cycle, a perfect standing wave has zero time-averaged
transport.
Solution 12: Instantaneous power in a standing wave
For
we have
and
Thus
| P | = −Tuxut | (108)
|
| = TB2kω cos(kx) sin(kx) cos(ωt) sin(ωt). | (109) |
Use
twice to obtain
At fixed x, the time average of sin(2ωt) over a full cycle is zero, so
Instantaneous power can vanish because the spatial factor is zero,
or because the temporal factor is zero,
Zero average transport means that there is no net energy carried permanently in one direction over
a cycle. It does not mean that energy is locally stationary; energy moves back and forth within the
standing-wave pattern.
Solution 13: Power carried by a localized pulse
For a pure right-moving wave,
Hence
| P | = (48)(0.075) | (116)
|
| = 3.60 W . | (117) |
For a pure left-moving wave with the same local energy density,
The detailed pulse shape is unnecessary because the pure-traveling-wave identity P = ±cℰ already
contains the local energy-flow rate.
Solution 14: Synthesis from string properties to transported power
The string properties are
The wave amplitude and frequency are
(a) Wave speed
| c | =  | (121)
|
| =  | (122)
|
| =  | (123)
|
| ≈ 89.4 m/s . | (124) |
(b) Angular frequency
| ω | = 2πf | (125)
|
| = 80π rad/s | (126)
|
| ≈ 251.3 rad/s . | (127) |
(c) Wavelength
| λ | =  | (128)
|
| =  | (129)
|
| ≈ 2.24 m . | (130) |
(d) Wavenumber
| k | =  | (131)
|
| ≈ | (132)
|
| ≈ 2.81 rad/m . | (133) |
(e) Average energy density
| ⟨ℰ⟩ | = μA2ω2 | (134)
|
| = (0.015)(0.0030)2(251.3)2 | (135)
|
| ≈ 4.26 × 10−3 J/m . | (136) |
(f) Average power from c⟨ℰ⟩
| ⟨P⟩ | = c⟨ℰ⟩ | (137)
|
| = (89.4)(4.26 × 10−3) | (138)
|
| ≈ 0.381 W . | (139) |
(g) Check using
TA2kω
| ⟨P⟩ | = TA2kω | (140)
|
| = (120)(0.0030)2(2.81)(251.3) | (141)
|
| ≈ 0.381 W . | (142) |
The two independent forms agree, as they must.
Common mistakes
- Mistake: dropping the minus sign in P = −Tuxut. The sign is what records the
direction of transport.
- Mistake: treating power as energy density. Energy density has units of joules per
meter; power has units of watts.
- Mistake: assuming P = 0 whenever u = 0. For a sinusoidal traveling wave, power is
actually maximum when the displacement crosses zero.
- Mistake: forgetting to convert millimeters to meters before using the average-power
formula.
- Mistake: adding right- and left-moving power magnitudes without signs. They
contribute with opposite signs to the net power.
- Mistake: saying that a standing wave has zero instantaneous power everywhere. Its
time-averaged transport is zero, but instantaneous local power can be nonzero.
What WM19E1 reinforces
The main result is
For a pure traveling wave,
where the sign gives the propagation direction. For a sinusoidal traveling wave,
For a fixed interval,
and for equal counter-propagating components the signed directional power can cancel even though
substantial wave energy remains in the system.
These ideas prepare the next stage of the course, where average power, intensity, flux, and
impedance are developed more systematically.
References
References
[1] A. P. French, Vibrations and Waves, M.I.T. Introductory Physics Series, W. W.
Norton & Company, 1971.
[2] Frank S. Crawford, Jr., Waves, Berkeley Physics Course, Volume 3, McGraw-Hill,
1968.
[3] William Moebs, Samuel J. Ling, and Jeff Sanny, University Physics, Volume 1,
OpenStax, 2016, Section 16.4, “Energy and Power of a Wave.”
[4] Howard Georgi, The Physics of Waves, Prentice Hall, 1993, chapters on the classical
wave equation, energy, and energy flow.
[5] Massachusetts Institute of Technology, 8.03SC Physics III: Vibrations and Waves,
MIT OpenCourseWare, wave-equation and mechanical-wave materials.
[6] Richard P. Feynman, Robert B. Leighton, and Matthew Sands, The Feynman Lectures
on Physics, Volume I, chapters on waves and the wave equation.